| 1st & 2nd SPINDLE |
GTS-150 |
GTS-200 |
GTS-260 |
| Hole through spindle |
Ø 51 mm ( 2" ) |
Ø 66 mm ( 2.6" ) |
Ø 76 mm ( 3" ) |
| Spindle bearing diameter |
Ø 80 mm ( 3.1" ) |
Ø 100 mm ( 3.9" ) |
Ø 120 mm ( 4.7" ) |
| Hydraulic cylinder |
6" |
8" |
10" |
| Spindle nose |
A2-5 |
A2-6 |
A2-8 |
Motor output
( cont. / 30 min. ) |
High |
5.5 / 7.5 kW ( 7 / 10 HP ) |
11 /15 kW ( 15 / 20 HP ) |
| Low |
3.5 / 7.5 kW ( 4.6 / 10 HP ) |
7.5 /15 kW ( 10 / 20 HP ) |
| Motor full output speed |
750 rpm |
| Spindle drive system |
Direct Belt Drive |
| Spindle drive ratio |
1 : 1 |
4 : 5 |
2 : 3 |
| Spindle speed range |
6,000 rpm |
4,800 rpm |
4,000 rpm |
| Spindle full output speed |
750 rpm |
600 rpm |
500 rpm |
| C-AXIS ( OPT. ) |
| Cf-axis drive motor |
FANUC AC Servo motor |
| Min. spindle indexing angle |
± 0.001° |
| Dynamic accuracy |
± 0.002° |
Home
MULTI-AXIS TURNING
GTS Series
Detail Info
Specifications
Dealer Network
Contact / Inquiry
Top