| BM Series |
|---|
| Models | BM-1400 | BM-1600 | BM-1800 | |
|---|---|---|---|---|
| X-axis travel | mm ( inch ) | 1,400 ( 55.1 ) | 1,600 ( 63.0 ) | 1,800 ( 70.8 ) |
| Y-axis travel | mm ( inch ) | 800 ( 31.5 ) | ||
| Z-axis travel | mm ( inch ) | 700 ( 27.5 ) | 800 ( 31.5 ) | |
| Distance from spindle center to column |
mm ( inch ) | 900 ( 35.4 ) | ||
| Distance from spindle nose to table center |
mm ( inch ) | 200 ~ 900 ( 7.87 ~ 35.4 ) | 200 ~ 1,000 ( 7.87 ~ 39.3 ) | |
| WORKING TABLE | ||||
| Table size ( X direction ) | mm ( inch ) | 1,500 ( 59.1 ) | 1,700 ( 66.9 ) | 2,000 ( 78.7 ) |
| Table size ( Y direction ) | mm ( inch ) | 800 ( 31.5 ) | ||
| Table load capacity | kg ( lb ) | 1,800 ( 3,968 ) | 2,000 ( 4,409 ) | 2,200 ( 4,850 ) |
| SPINDLE | ||||
| Spindle taper | 40-Taper : CAT 40*1 50-Taper : CAT 50*1 |
|||
| Spindle configuration | 40-Taper : Direct Drive 50-Taper : 2-speed Gear Box / Direct Drive ( Opt. ) |
|||
| Spindle motor ( cont. / 30 min. ) | kW ( HP ) | 40-Taper : 7.5 / 11 ( 10 / 15 )*2 50-Taper : 11 / 15 ( 15 / 20 )*2 |
||
| Spindle speed | rpm | 40-Taper : 65 ~ 12,000 / 65 ~ 15,000 ( Opt. ) 50-Taper : L : 65 ~ 1,500 / H : 1,500 ~ 6,000 / Direct Drive 10,000 |
||
| FEED RATE | ||||
| X / Y axes rapid feed rate | m/min. ( IPM ) | 20 ( 788 ) | ||
| Z-axis rapids feed rate | m/min. ( IPM ) | 18 ( 709 ) | ||
| Cutting feed rate | m/min. ( IPM ) | 1 ~ 8 ( 39.4 ~ 314 ) | ||
| TOOL MAGAZINE | ||||
| Tool magazine capacity | T | 40-Taper*3 50-Taper : 16T drum ATC*3 |
||
| Max. tool diameter / adj. pocket empty |
mm ( inch ) | 40-Taper : 127 / 228 ( 5" / 8.97" ) 50-Taper : 160 / 300 ( 6.3" / 11.8" ) |
||
| Max. tool length | mm ( inch ) | 40-Taper : 250 ( 9.84" ) 50-Taper : 400 ( 15.7" ) |
||
| Max. tool weight | kg ( lb ) | 40-Taper : 8 ( 18 ) 50-Taper : 15 ( 33 ) |
||
| ACCURACY | ||||
| Positioning accuracy ( JIS B 6338 ) | mm ( inch ) | ± 0.01 / Full Travel ( ± 0.00039 / Full Travel ) | ||
| Positioning accuracy ( VDI 3441 ) | mm ( inch ) | P = 0.02 ( P = 0.00079 ) | ||
| Repeatability ( JIS B 6338 ) | mm ( inch ) | ± 0.003 ( ± 0.000118 ) | ||
| Repeatability ( VDI 3441 ) | mm ( inch ) | Ps = 0.008 ( Ps = 0.00031 ) | ||
| GENERAL | ||||
| Control system | FANUC Oi -MF / 31i -MB MITSUBISHI M70 / M730 | |||
| Pneumatic pressure requirement | kg/cm2 ( PSI ) | 6 ( 85 ) | ||
| Power requirement | V | 220 ± 10% | ||
| Coolant tank capacity | liter ( gal ) | 600 ( 159 ) | 600 ( 159 ) | 630 ( 167 ) |
| Machine weight | kg ( lbs ) | 13,000 ( 28,660 ) | 15,000 ( 33,069 ) | 17,000 ( 37,478 ) |
Specifications are subject to change without notice.
*1 : Optional BT, DIN.
*2 : Different spindle motor maybe optional available, please consult with your sales representative.
*3 : Optional 24 / 30 / 40 tools swing arm ATC.
Top