LP-16 series Bridge Type Vertical Machining Center :
Print this page | LP-2516 | LP-3016 | LP-4016 | LP-5016 |
---|---|---|---|---|
CAPACITY | ||||
X-axis travel | 2,500 mm ( 98.4" ) | 3,000 mm ( 118.1" ) | 4,000 mm ( 157.4" ) | 5,000 mm ( 196.8" ) |
Y-axis travel | 1,600 mm ( 62.9" ) | |||
Z-axis travel | 760 mm ( 29.9" ) | |||
Dist. form spindle nose to table top | 240 ~ 1,000 mm ( 9.4"~ 39.3") | |||
Dist. between columns | 1,700 mm ( 66.9" ) | |||
WORKING TABLE | ||||
Table size ( X direction ) | 2,310 mm ( 90.9" ) |
3,260 mm ( 128.3" ) |
4,200 mm ( 165.3" ) |
5,000 mm ( 196.8" ) |
Table size ( Y direction ) | 1,500 mm ( 58.9" ) | |||
Table load capacity | 8,000 kg ( 17,600 lb ) |
10,000 kg ( 22,000 lb ) |
12,000 kg ( 26,400 lb ) |
14,000 kg ( 30,800 lb ) |
SPINDLE | ||||
Spindle motor ( cont. / 30 min. ) | 22 / 26 kW ( 30 / 35 HP ) | |||
Spindle speed | 6,000 rpm | |||
Spindle taper | CAT50 | |||
FEEDRATE | ||||
X-axis rapid feedrate | 20 m/min. ( 788 IPM ) | 20 m/min. ( 788 IPM ) | 15 m/min. ( 590 IPM ) | 10 m/min. ( 393 IPM ) |
Y-axis rapid feedrate | 20 m/min. ( 788 IPM ) | |||
Z-axis rapid feedrate | 15 m/min. ( 590 IPM ) | |||
Cutting feedrate | 10 m / min. ( 393 IPM ) | |||
TOOL MAGAZINE | ||||
Tool magazine capacity | 32 ( 40 Opt. ) | |||
Max. tool diameter / adj. pocket empty | Ø 127 / 215 mm ( Ø 5.0" / 8.4" ) | |||
Max. tool length ( from gauge line ) | 400 mm ( 15.7" ) | |||
Max. tool weight | 20 kg ( 44 lb ) | |||
ACCURACY | ||||
Positioning accuracy ( JIS B 6338 ) / Full Travel |
± 0.015 mm ( ± 0.00059" ) |
|||
Positioning accuracy ( VDI 3441 ) / Full Travel |
P ≤ 0.020 mm ( P ≤ 0.00078" ) |
P ≤ 0.025 mm ( P ≤ 0.00098" ) |
P ≤ 0.030 mm ( P ≤ 0.00118" ) |
P ≤ 0.040 mm ( P ≤ 0.00157" ) |
Repeatability ( JIS B 6338 ) / Full Travel |
± 0.003 mm ( ± 0.000118" ) |
|||
Repeatability ( VDI 3441 ) / Full Travel |
Ps ≤ 0.015 mm ( Ps ≤ 0.00059" ) |
Ps ≤ 0.020 mm ( Ps ≤ 0.00078" ) |
Ps ≤ 0.025 mm ( Ps ≤ 0.00098" ) |
Ps ≤ 0.030 mm ( Ps ≤ 0.00118" ) |
GENERAL | ||||
Power requirement | 220 ± 10 % | |||
Pneumatic pressure requirement ( min. ) | 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI ) | |||
Hydraulic unit tank capacity, [ pump ] | 120 liter ( 31.5 gal ), [ 10 HP ] | |||
Lubrication oil tank capacity | 6 liter ( 1.6 gal ) | |||
Coolant tank capacity , [ pump ] | 420 liter ( 110 gal ), [ 1.5 HP ] | |||
Machine weight | 26,000 kg ( 57,200 lb ) |
29,000 kg ( 63,800 lb ) |
33,000 kg ( 72,600 lb ) |
36,000 kg ( 79,200 lb ) |
Specifications are subject to change without notice.