| GLS-150 series |
|---|
| TAILSTOCK ( OPT. ) | GLS-150 | GLS-200 |
|---|---|---|
| Quill center taper | MT#4 ( Live center required. ) | |
| Quill diameter / travel | Ø 70 / 150 mm ( 2.75" / 5.9" ) | |
| Tail stock base travel*¹ | 290 mm ( 11.41" ) | |
| Programmable quill / base | Yes / No | |
| Optional programmable base type | Hydraulic motor + Guide way [ Servo motor + Ball screw ( Upon request ) ] |
|
| GENERAL | ||
| Repeatability ( X / Y / Z / B ) | ± 0.002 mm ( ± 0.000078" ) | |
| Standard CNC control | FANUC Oi - TF | |
| Voltage / Power requirement | AC 200 / 220 +10% to -15% 3 phase / 20 kVA | |
| Hydraulic tank capacity | 50 L ( 13.2 gal ) | |
| Coolant tank capacity | 100 L ( 26.41 gal ) | |
| Coolant pump | 0.5 kW ( 3/4 HP , 60 Hz ) rated at 3 bar ( 43.5 PSI ) | |
| Machine weight | 3,200 kg ( 7,054 lb ) Y models : 3,500 kg ( 7,716 lb ) |
|
| Dimensions L × W × H | Machine : 2,432 x 1,643 x 1,727 mm ( 95.74" x 64.68" x 67.99" ) Machine w / Y-axis : 2,480 x 1,655 x 2,060 mm ( 97.63" x 65.15" x 81.1" ) |
|
Top
Specifications are subject to change without notice.