TLV series |
---|
CAPACITY | TLV-500 | TLV-700 |
---|---|---|
X-axis travel | 500 mm ( 19.68" ) | 700 mm ( 27.55" ) |
Y-axis travel | 400 mm ( 15.74" ) | |
Z-axis travel | 300 mm ( 11.81" ) | |
Dist. from spindle nose to table top | 180 ~ 480 mm ( 7.08" ~ 18.89" ) | |
Dist. from spindle nose to column | 453 mm ( 17.83" ) | |
TABLE | ||
Table size ( X x Y ) | 600 x 400 mm ( 23.62" x 15.74" ) | |
Table load capacity | 250 kg ( 550 lb ) | |
SPINDLE | ||
Spindle taper | CAT30 | |
Spindle motor ( cont. / peak ) | 4 / 14 kW ( 5.5 / 18.5 HP ) ( SIEMENS ) | |
Spindle speed | 10,000 / 12,000 rpm | |
Spindle drvie system | Direct-drive | |
FEED RATE | ||
X / Y / Z axes rapids | 48 m/min. ( 1,890 IPM ) | |
X / Y axes cutting feed rate | 10 m/min. ( 394 IPM ) | |
Z-axis cutting feed rate | 20 m/min. ( 788 IPM ) | |
X / Y axes servo motor | 1.5 kW ( 2 HP ) | |
Z-axis servo motor | 2.3 kW ( 3 HP ) | |
TOOL MAGAZINE | ||
Tool magazine capacity | 14 T | |
Max. tool length | 250 mm ( 9.84" ) | |
Max. tool weight | 3 Kg ( 6.6 lb ) | |
Max. tool magazine load | 25 Kg ( 55 lb ) | |
Max. tool dia. / adj. pocket empty | Ø 90 / 150 mm ( Ø 3.54" / 5.90" ) | |
ACCURACY | ||
Positioning accuracy | 0.005 / 300 mm ( 0.0002" / 11.81" ) | |
Repeatability | ± 0.003 mm ( ± 0.00012" ) | |
GENERAL | ||
Standard CNC controller | SIEMENS 828D ( MITSUBISHI 70M-2BV Opt. ) | |
Voltage requirement | 15 kVA | |
Pneumatic pressure requirement | 6 Kg/cm2 ( 85 PSI ) | |
Coolant tank capacity | 150 L ( 40 gal ) | |
Machine weight | 2,500 Kg ( 5,500 lb ) | |
Dimensions ( L × W × H ) | 1,580 x 2,245 x 2,260 mm ( 62.20" x 88.38" x 88.97" ) |
Specifications are subject to change without notice.