SP series Bridge Type Vertical Machining Center :
| 列印此頁面 | SP-2016 | SP-3016 | SP-4016 | |
|---|---|---|---|---|
| CAPACITY | ||||
| X-axis travel | 2,100 mm ( 82.7" ) | 3,060 mm ( 120.5" ) | 4,000 mm ( 157.4" ) | |
| Y-axis travel | 1,600 mm ( 62.9" ) | |||
| Z-axis travel | 760 mm ( 29.9" ) | |||
| Dist. form spindle nose to table top | 240 ~ 1,000 mm ( 9.4"~ 39.3") | |||
| Dist. between columns | 1,700 mm ( 66.9" ) | |||
| WORKING TABLE | ||||
| Table size ( X direction ) | 2,310 mm ( 90.9" ) | 3,260 mm ( 128.3" ) | 4,200 mm ( 165.3" ) | |
| Table size ( Y direction ) | 1,500 mm ( 59.1" ) | |||
| Table load capacity | 8,000 kg ( 17,600 lb ) | 10,000 kg ( 22,000 lb ) | 12,000 kg ( 26,400 lb ) | |
| SPINDLE | ||||
| Spindle motor ( cont. / 30 min. ) | 22 / 26 kW ( 30 / 35 HP ) | |||
| Spindle speed | 6,000 rpm | |||
| Spindle taper | CAT50 | |||
| FEEDRATE | ||||
| X-axis rapid feedrate | 20 m/min. ( 788 IPM ) | 20 m/min. ( 788 IPM ) | 15 m/min. ( 590 IPM ) | |
| Y-axis rapid feedrate | 20 m/min. ( 788 IPM ) | |||
| Z-axis rapid feedrate | 15 m/min. ( 590 IPM ) | |||
| Cutting feedrate | 10 m / min. ( 393 IPM ) | |||
| TOOL MAGAZINE | ||||
| Tool magazine capacity | 32 ( 60 / 90 / 120 Opt. ) | |||
| Max. tool diameter / adj. pocket empty | Ø 127 / 215 mm ( Ø 5.0" / 8.4" ) | |||
| Max. tool length ( from gauge line ) | 350 mm ( 13.7" ) | |||
| Max. tool weight | 20 kg ( 44 lb ) | |||
| ACCURACY | ||||
| Positioning accuracy ( JIS B 6338 ) / Full Travel |
± 0.015 mm ( ± 0.00059" ) |
|||
| Positioning accuracy ( VDI 3441 ) / Full Travel |
P ≤ 0.020 mm ( P ≤ 0.00078" ) |
P ≤ 0.025 mm ( P ≤ 0.00098" ) |
P ≤ 0.030 mm ( P ≤ 0.00118" ) |
|
| Repeatability ( JIS B 6338 ) / Full Travel |
± 0.003 mm ( ± 0.000118" ) |
|||
| Repeatability ( VDI 3441 ) / Full Travel |
Ps ≤ 0.015 mm ( Ps ≤ 0.00059" ) |
Ps ≤ 0.020 mm ( Ps ≤ 0.00078" ) |
Ps ≤ 0.025 mm ( Ps ≤ 0.00098" ) |
|
| GENERAL | ||||
| Power requirement | 220 ± 10 % | |||
| Pneumatic pressure requirement ( min. ) | 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI ) | |||
| Hydraulic unit tank capacity , [ pump ] | 120 liter ( 31.5 gal ), [ 10 HP ] | |||
| Lubrication oil tank capacity | 6 liter ( 1.6 gal ) | |||
| Coolant tank capacity , [ pump ] | 420 liter ( 110 gal ) , [ 1.5 HP ] | |||
| Machine weight | 23,000 kg ( 50,600 lb ) |
28,000 kg ( 61,600 lb ) |
33,000 kg ( 72,600 lb ) |
|
Specifications are subject to change without notice.
Top