HTP Series Super Rigid Bridge Type Machining Center :
| Print this page | HTP-4033 | HTP-5033 | HTP-6033 | HTP-7033 |
|---|---|---|---|---|
| SPECIFICATIONS | ||||
| X-axis travel | 4,000 mm ( 157.4" ) | 5,000 mm ( 196.8" ) | 6,000 mm ( 236.2" ) | 7,000 mm ( 275.5" ) |
| Y-axis travel | 3,300 mm ( Opt. 4,000 ) [ 129.9" ( Opt. 157.4" ) ] |
|||
| Z-axis travel | 1,000 mm ( Opt. 1,200 / 1,400 ) [ 39.3" ( Opt. 47.2" / 55.1" ) ] |
|||
| Dist. between columns | 3,500 mm ( 137.7" ) | |||
| Dist. from spindle nose to table top | 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 ) [ 7.8" ~ 47.2" ( Opt. 7.8" ~ 55.1" / 7.8" ~ 62.9" )] |
|||
| TABLE | ||||
| Table size ( X x Y ) | 4,020 x 3,000 mm ( 158.2" x 118.1" ) |
5,020 x 3,000 mm ( 197.6" x 118.1" ) |
6,020 x 3,000 mm ( 237.0" x 118.1" ) |
7,020 x 3,000 mm ( 276.3" x 118.1" ) |
| Table load capacity | 15,000 kg ( 33.070 lb ) |
18,000 kg ( 39,680 lb ) |
20,000 kg ( 44,090 lb ) |
20,000 kg ( 44,090 lb ) |
| SPINDLE | ||||
| Spindle taper | BBT50 ( ISO 50 ) | |||
| Spindle motor ( Cont. / 30 min. ) | 22 / 26 kW ( Opt. 30 / 37 ) [ 30 / 35 HP ( Opt. 40 / 50 ) ] |
|||
| Spindle speed | Gear Spindle 4,000 rpm | |||
| FEED RATE | ||||
| X-axis rapids feed rate | 15 m/min. ( 590 IPM ) |
10 m/min. ( 393 IPM ) |
7.5 m/min. ( 295 IPM ) |
|
| Y / Z axes rapids feed rate | 12 m/min. ( 472 IPM ) |
|||
| Cutting feed rate | 1 ~ 10 m/min. ( 1 ~ 393 IPM ) |
1 ~ 5 m/min. ( 1 ~ 196 IPM ) |
||
| TOOL MAGAZINE | ||||
| Tool magazine capacity | 32 T ( Opt. 40 / 60 / 90 / 120 ) | |||
| Max. tool length | 350 mm ( Opt. 400 ) [ 13.7" ( Opt. 15.7" ) ] | |||
| Max. tool weight | 20 kg ( 44 lb ) | |||
| Max. tool diameter / adj. pocket empty | Ø 127 / Ø 215 mm ( Ø 5" / Ø 8.4" ) | |||
| ACCURACY | ||||
| Positioning accuracy ( JIS B 6338 ) | ± 0.015 mm ( 0.00059" ) / Full Travel | |||
| Positioning accuracy ( VDI 3441 ) | P ≤ 0.030 mm ( 0.0011" ) / Full Travel |
P ≤ 0.040 mm ( 0.0015" ) / Full Travel |
P ≤ 0.050 mm ( 0.0019" ) / Full Travel |
P ≤ 0.040 mm ( 0.0015" ) / Full Travel |
| Repeatability ( JIS B 6338 ) | ± 0.003 mm ( ± 0.00011" ) | |||
| Repeatability ( VDI 3441 ) | Ps ≤ 0.025 mm ( 0.00098" ) |
Ps ≤ 0.030 mm ( 0.0011" ) |
Ps ≤ 0.035 mm ( 0.0016" ) |
Ps ≤ 0.030 mm ( 0.0011" ) |
| GENERAL | ||||
| Coolant tank capacity | 1,000 liter ( 264 gal ) | |||
| Lubrication oil tank capacity | 6 liter ( 1.5 gal ) | |||
| Hydraulic tank capacity | 100 liter ( 26.4 gal ) | |||
| Pneumatic pressure requirement | 5 ~ 8 kg / cm² ( 71.1 ~ 113.7 ISP ) | |||
| Power requirment | AC 220 ± 10 % Vac | |||
| Machine weight | 43,000 kg ( 94,800 lb ) |
47,000 kg ( 103,620 lb ) |
51,000 kg ( 112,440 lb ) |
61,000 kg ( 134,490 lb ) |
Specifications are subject to change without notice.
Top