HVM-6025 5-Face Bridge Type Machining Center:
Print This Page | HVM-4025 | HVM-5025 | HVM-6025 | HVM-6032 |
---|---|---|---|---|
WORKING CAPACITY | ||||
X travel | 157.5" | 196.8" | 236.2" | 236.2" |
Y travel | 126.0" | 126.0" | 126.0" | 153.5" |
Z travel | 39.3" | 39.3" | 39.3" | 39.3" |
Table size | 158.3" x 79.1" | 197.6" x 79.1" | 237.0" x 79.1" | 237.0" x 94.5" |
Max. table load | 26,400 lb | 33,000 lb | 37,400 lb | 44,000 |
Distance between columns | 98.4" | 98.4" | 98.4" | 126.0" |
HEADSTOCK | ||||
Spindle motor ( cont. / 30min. ) |
30 / 35 HP | 30 / 35 HP | 30 / 35 HP | 30 / 35 HP |
Spindle speed | 10 ~ 4,000 rpm ( in vertical direction ), 20 ~ 24,00 rpm ( in horizontal direction ) |
10 ~ 4,000 rpm ( in vertical direction ), 20 ~ 24,00 rpm ( in horizontal direction ) |
10 ~ 4,000 rpm ( in vertical direction ), 20 ~ 24,00 rpm ( in horizontal direction ) |
10 ~ 4,000 rpm ( in vertical direction ), 20 ~ 24,00 rpm ( in horizontal direction ) |
Spindle nose configuration | CAT50 | CAT50 | CAT50 | CAT50 |
Distance nose to table | 7.9" ~ 47.2 ( standard ), 15.7" ~ 55.1" ( Option ) |
7.9" ~ 47.2 ( standard ), 15.7" ~ 55.1" ( Option ) |
7.9" ~ 47.2 ( standard ), 15.7" ~ 55.1" ( Option ) |
7.9" ~ 47.2 ( standard ), 15.7" ~ 55.1" ( Option ) |
FEEDRATE | ||||
X axis ( Rapid traverse ) | 590.6 IPM. | 393.7 IPM. | 295.2 IPM. | 295.2 IPM. |
Y, Z axis ( Rapid traverse ) | 590.6 / 393.7 IPM. |
590.6 / 393.7 IPM. |
590.6 / 393.7 IPM. |
472.4 / 393.7 IPM. |
Cutting feedrate | 0.04 ~ 393.7 IPM. |
0.04 ~ 315.0 IPM. |
0.04 ~ 196.9 IPM. |
0.04 ~ 393.7 IPM. |
ACCURACY | ||||
Repeatability ( JIS6338 ) | ± 0.0001" | ± 0.0001" | ± 0.0001" | ± 0.0001" |
Positioning accuracy ( JIS6338 ) |
± 0.0006" ( full travel ) |
± 0.0006" ( full travel ) |
± 0.0006" ( full travel ) |
± 0.0006" ( full travel ) |
TOOL MAGAZINE | ||||
Tool capacity | 60 tools ( 90, 120 Option ) |
60 tools ( 90, 120 Option ) |
60 tools ( 90, 120 Option ) |
60 tools ( 90, 120 Option ) |
Max. tool DIA. ( full / adjacent ) |
5.0" / 9.4" | 5.0" / 9.4" | 5.0" / 9.4" | 5.0" / 9.4" |
Max. tool length | 15.7" | 15.7" | 15.7" | 15.7" |
Max. tool weight | 55 lb | 55 lb | 55 lb | 55 lb |
Tool changing time ( tool to tool ) |
80 sec. | 80 sec. | 80 sec. | 80 sec. |
DIMENSION ( APPROX. ) | ||||
Length | 413" | 503" | 585" | 585" |
Width | 267" | 267" | 267" | 294" |
Height | 220" | 220" | 220" | 220" |
Weight | 116,600 lb | 121,000 lb | 125,400 lb | 127,600 lb |
Print This Page | HVM-4025 | HVM-5025 | HVM-6025 | HVM-6032 |
Specifications are subject to change without notice.
*1. The distance may be varied among different options. Please double check with your sales contact on the actual value.