| TURRET | GS-200/200L | GS-260/260L | GS-280/280L |
|---|---|---|---|
| Stations | 12 Standard | ||
| Indexing drive | FANUC AC Servo motor | ||
| Indexing speed | 0.2 sec. Adjacent / 0.5 sec. 180 degrees ( Single step ) | ||
| Accuracy | Positioning: +/- 0.00069°, Repeatability: +/- 0.00027° | ||
| OD tool shank size | □ 25 mm ( Inch version: □ 1" ) | ||
| ID tool shank size | Up to Ø 40 mm ( Inch version: Ø1-1/2" ) | ||
| LIVE TOOLING TURRET (OPTIONAL) | GS-200/200L | GS-260/260L | GS-280/280L | |
|---|---|---|---|---|
| Max. turning length*1 | 600 mm / 1,200 mm | 595 mm / 1,195 mm | ||
| ( 23.62" ) / ( 47.24" ) | ( 23.42" ) / ( 47.04" ) | |||
| Stations | 12 | |||
| Live tooling stations | 12 ( Live tooling tools rotate in working position only. ) | |||
| Live tooling drive motor | AC 3.0 kW ( 4.1 HP, FANUC α12/3,000i, Absolute encoder, 1,000,000 / rev.) | |||
| Live tooling torque | 12 N-M ( 9 ft-lbs. ) [ Const. ] / 34 N-M ( 25 ft-lbs. ) [ Intermittent ] | |||
| Indexing drive type | FANUC AC Servo motor | |||
| Index speed | 0.2 sec. Adjacent / 0.5 sec. 180 degrees ( Single step ) | |||
| OD tool shank size | □ 25 mm ( Inch version: □ 1" ) | |||
| ID tool shank size | Up to Ø 40 mm ( Inch version: Ø 1-1/2" ) | |||
| Live tooling shank size | 1 ~ 20 mm ( 0.04" ~ 0.78" ) ER 32 collets | |||
| Live tooling RPM range | 10 ~ 3,000 RPM | |||
Specifications are subject to change without notice. *1 Individual models may vary, please see interference drawings. *2 Work piece supported by chuck & tailstock. *3 Chucks optional. *4 Optional 10" Big-bore hydraulic cylinder & chuck provide Ø 78 mm ( 3.07" ) bar capacity.
Top