| GA-3000 Series |
|---|
| X & Z AXES | GA-3000 | GA-3300 | GA-3600 |
|---|---|---|---|
| Max. X-axis travel*3 | 0.78" + 9.05" + 0.39" ( 20 mm + 230 mm + 10 mm ) | ||
| Max. Z-axis travel*1 | 1.18" + 23.62" ( 30 mm + 600 mm ) || 1.18" + 47.24" ( 30 mm + 1,200 mm ) | X / Z axes rapids | 788 IPM ( 20 m / min. ) / 945 lPM ( 24 m / min. ) |
| Slide way type | Hardened & Ground Box Ways | ||
| Feed rates | 1~189 IPM ( 1 ~ 4,800 mm / min. ) | ||
| X-axis servo motor | AC 4 HP ( 2.7 kW , FANUC α 12β / 4,000is , Absolute encoder, 1,000,000 / rev. ) | ||
| Z-axis servo motor | AC 6 HP ( 4.5 kW , FANUC α 22 / 4,000is , Absolute encoder, 1,000,000 / rev. ) | ||
| X-axis ball screw Ø / pitch | Ø 1.41" ( 36 mm ) / Pitch 8 | ||
| Z-axis ball screw Ø / pitch | Ø 1.77" ( 45 mm ) / Pitch 10 | ||
| X / Z axes thrust ( Con. ) | 2,116 lbs. ( 962 Kg ) / 3,104 lbs. ( 1,4111 Kg ) | ||
Top
Specifications are subject to change without notice.
*1 GA-2000/C || GA-2000 || GA-2000L
*2 Work piece supported by chuck & tailstock.
*3 Individual models may vary, please see interference drawings.
*4 GA-3000 || GA-3000L0 || GA-3000L