| GA-2000 Series |
|---|
| TAILSTOCK | GA-2000 | GA-2600 | GA-2800 |
|---|---|---|---|
| Quill center taper | MT #4 ( Live Center ) | ||
| Quill diameter / travel | Ø 2.75" ( 70 mm ) / 5.90" ( 150 mm ) | ||
| Tail stock base travel *1 | Fixed || 21.65" ( 550 mm ) || 44.88" ( 1,140 mm ) | ||
| Programmable quill / base | Yes / Yes ( Not available on GA-2000C series ) | ||
| Programmable base type | Positioned by Z-axis carriage | ||
| PARTS CATCHER (OPTIONAL) | GA-2000 | GA-2600 | GA-2800 |
| Maximum part diameter | Ø 3.03" ( 77 mm ) | ||
| Maximum part length | 5.9" ( 150 mm ) | ||
| GENERAL | GA-2000 | GA-2600 | GA-2800 |
| Positioning accuracy | + / - 0.0002" ( 0.005 mm ) | ||
| Repeatability | + / - 0.0001" ( 0.003 mm ) | ||
| Standard CNC control | FANUC Oi-TC | ||
| Voltage / Power requirement | AC 200 / 220 + 10% to - 15% 3 phase / 26 KVA | ||
| Hydraulic tank capacity | 8 gal. ( 30 L ) || 10 gal. ( 40 L ) || 10 gal. ( 40 L ) | ||
| Coolant tank capacity | 55 gal. ( 200 L ) | ||
| Coolant pump | 3 / 4 HP rated at 60 PSI | ||
| Machine weight *1 | 7,700 lbs. ( 3,500 Kg ) || 8,800 lbs. ( 4,000 Kg ) || 10,120lbs. ( 4,600 Kg ) | ||
| Dimensions L × W × H | Machine: 78" || 97" || 128" x 65" x 68" || 75" || 73" ( 1,975 || 2,445 || 3,242 x 1,630 x 1,725 || 1,890 || 1,845 mm ) | ||
| Machine w / chip conveyor: GA-2000C : 78" x 92" x 68" ( 1,975 x 2,235 x 1,725 mm ) | |||
| GA-2000 : 131" x 65" x 75" ( 3,335 x 1,630 x 1,890 mm ) | |||
| GA-2000L : 163" x 65" x 73" ( 4,132 x 1,630 x 1,875 mm ) | |||
Top
Specifications are subject to change without notice.
*1 GA-2000/C || GA-2000 || GA-2000L