AF Series |
---|
Models | AF-1400 | AF-1600 | AF-1800 | |
---|---|---|---|---|
X-axis travel | mm ( inch ) | 1,400 ( 55.1 ) | 1,600 ( 62.9 ) | 1,800 ( 70.8 ) |
Y-axis travel | mm ( inch ) | 800 ( 31.4 ) | ||
Z-axis travel | mm ( inch ) | 800 ( 31.4 ) | ||
Distance from spindle nose to table center |
mm ( inch ) | 963 ( 37.9 ) | ||
Distance between columns | mm ( inch ) | 200 ~ 1,000 ( 7.87 ~ 39.3 ) | ||
WORKING TABLE | ||||
Table size ( X direction ) | mm ( inch ) | 1,500 ( 59.1 ) | 1,700 ( 66.9 ) | 1,900 ( 74.8 ) |
Table size ( Y direction ) | mm ( inch ) | 800 ( 31.4 ) | ||
Table load capacity | kg ( lb ) | 1,200 ( 2,640 ) | 1,500 ( 3,300 ) | 1,800 ( 3,960 ) |
SPINDLE | ||||
Spindle motor ( cont. / 30 min. ) | kW ( HP ) | 11 ( 15 HP ) / 15 ( 20 HP ) | ||
Spindle speed | rpm | Direct-driven 8,000 | ||
Spindle taper | BT50 | |||
FEED RATE | ||||
X / Y axes rapid feed rate | m/min. ( IPM ) | 30 (1,180 ) | ||
Z-axis rapids feed rate | m/min. ( IPM ) | 24 ( 945 ) | ||
Cutting feed rate | m/min. ( IPM ) | 1-10 ( 1 ~ 394 ) | ||
TOOL MAGAZINE | ||||
Tool magazine capacity | T | 24 | ||
Max. tool length | mm ( inch ) | 350 ( 13.7 ) | ||
Max. tool weight | kg ( lb ) | 15 ( 33 ) | ||
Max. tool diameter / adj. pocket empty |
mm ( inch ) | Ø 127 ( 5.00 ) / Ø 200 ( 7.87 ) | ||
ACCURACY | ||||
Positioning accuracy ( JIS B 6338 ) | mm ( inch ) | ± 0.01 ( ± 0.00039 ) | ||
Positioning accuracy ( VDI 3441 ) | mm ( inch ) | P = 0.012 ( 0.00047 ) | ||
Repeatability ( JIS B 6338 ) | mm ( inch ) | ± 0.003 ( ± 0.000118 ) | ||
Repeatability ( VDI 3441 ) | mm ( inch ) | Ps = 0.008 ( Ps = 0.00031 ) | ||
GENERAL | ||||
Control system | FANUC Oi - MF | |||
Pneumatic pressure requirement | kg/cm2 ( PSI ) | 6 ( 85 ) | ||
Power requirement | kVA | 40 | ||
Coolant tank capacity | liter ( gal ) | 505 ( 133.3 ) | 518 ( 136.7 ) | 600 ( 158.4 ) |
Machine weight | kg ( lbs ) | 14,000 ( 30,800 ) | 16,000 ( 35,200 ) | 18,000 ( 39,600 ) |
Specifications are subject to change without notice.