SP-3016HSS High Speed Bridge Type Machining Center:
Print This Page | VP-2012HSS | SP-2016HSS | SP-3016HSS | SP-3016 |
---|---|---|---|---|
WORKING CAPACITY | ||||
X travel | 78.7" | 82.7" | 120.5" | 120.5" |
Y travel | 47.2" | 63.0" | 63.0" | 63.0" |
Z travel | 30.0" | 30.0" | 30.0" | 30.0" |
Table size | 78.7" x 43.3" | 90.9" x 59.0" | 128.3" x 59.0" | 128.3" x 59.0" |
Max. table load | 7,700 lb | 17,600 lb | 22,000 lb | 22,000 lb |
Distance between columns | 51.2" | 66.9" | 66.9" | 66.9" |
HEADSTOCK | ||||
Spindle motor ( cont. / 30min. ) | 25 / 30 HP | 25 / 30 HP | 25 / 30 HP | 30 / 35 HP |
Spindle speed | 10 ~ 15,000 rpm | 10 ~ 15,000 rpm | 10 ~ 15,000 rpm | 10 ~ 6,000 rpm ( Standard ), 10 ~ 8,000 rpm direct driven ( Option ) |
Spindle taper | CAT40 | CAT40 | CAT40 | CAT50 |
Distance nose to table | 6.3" ~ 36.2" | 6.3" ~ 36.2" | 6.3" ~ 36.2" | 9.4" ~ 39.4" |
FEEDRATE | ||||
Rapid traverse ( X,Y axes ) | 787.4 IPM. | 787.4 IPM. | 787.4 IPM. | 787.4 IPM. |
Z axis | 590.5 IPM. | 590.5 IPM. | 590.5 IPM. | 393.7 IPM. |
Cutting feedrate | 0.04 ~ 393.7 IPM. | 0.04 ~ 393.7 IPM. | 0.04 ~ 393.7 IPM. |
0.04 ~ 393.7 IPM. |
ACCURACY | ||||
Repeatability | ± 0.0001" | ± 0.0001" | ± 0.0001" | ± 0.0001" |
Positioning accuracy | ± 0.0002" Full travel | ± 0.0004" Full travel | ± 0.0004" Full travel |
± 0.0006" Full travel |
TOOL MAGAZINE | ||||
Tool capacity | 32 | 32 | 32 | 32 ( 60, 90, 120 Option ) |
Tool holder spec. | CAT40 | CAT50 | CAT50 | CAT50 |
Max. tool DIA. / adjacent empty | 4" / ------ | 4" / 5" | 4" / 5" | 5.0" / 8.5" |
Max. tool length | 11.8" | 11.8" | 11.8" | 13.8" |
Max. tool weight | 15 lb | 15 lb | 15 lb | 44 lb |
Tool changing time ( tool to tool ) | 12 sec. | 12 sec. | 12 sec. | 8 sec. |
DIMENSION ( APPROX. ) | ||||
Length | 228" | 264" | 342" | 342" |
Width | 194" | 184" | 184" | 185" |
Height | 141" | 153" | 153" | 157" |
Print This Page | VP-2012HSS | SP-2016HSS | SP-3016HSS | SP-3016 |
Specifications are subject to change without notice.