FCV-620 series Ultra Performance 5-Axis Machining Center :
SPECIFICATIONS | FCV-620 | |
---|---|---|
X-axis travel | mm ( inch ) | 635 ( 25.00" ) |
Y-axis travel | mm ( inch ) | 535 ( 21.06" ) |
Z-axis travel | mm ( inch ) | 460 ( 18.11" ) |
B-axis rotary range | degree | -50˚ ~ +110˚ |
C-axis rotary range | degree | 360˚ |
B / C axes swiveling speed | rpm | 25 |
Distance from spindle nose to table center | mm ( inch ) | 150 ~ 610 ( 5.91" ~ 24.01" ) |
ROTARY TABLE | ||
Table internal diameter | mm ( inch ) | Ø 500 ( Ø 19.68" ) |
Table external diameter | mm ( inch ) | Ø 650 ( Ø 25.59" ) |
Table load capacity | kg ( lb ) | 300 ( 660 ) |
T-slot ( width x no. x space ) | mm ( inch ) | 18 X 5 X 100 ( 0.71" x 5 x 3.94" ) |
SPINDLE | ||
Spindle taper | BBT40 / HSK-A63 | |
Spindle speed | rpm | Direct drive 12,000 ( 15,000 ) / Built-in 16,000 ( 20,000 ) |
Spindle motor ( cont. / min ) | kW ( HP ) | 11 / 15 ( 15 / 20 ) ( FANUC 12,000 rpm ) |
FEED RATE | ||
X / Y / Z axes rapid feed rate | m/min. ( IPM ) | 36 ( 1,418 ) |
Cutting feed rate | m/min. ( IPM ) | 1-20 ( 1-788 ) |
TOOL MAGAZINE | ||
Tool magazine capacity | T | 32 ( 40 / 60 ) |
Max. tool diameter / adj. pocket empty | mm ( inch ) | Ø 75 / Ø 127 ( Ø 2.95" / Ø 5.00" ) |
Max. tool length | mm ( inch ) | 250 ( 9.84" ) |
Max. tool weight | kg ( lb ) | 6 ( 13 ) |
ACCURACY | ||
Positioning accuracy ( VDI 3441 ) | mm ( inch ) | P ≤ 0.012 / Full Travel ( P ≤ 0.0005" / Full Travel ) |
Repeatability ( VDI 3441 ) | mm ( inch ) | Ps ≤ 0.008 ( Ps ≤ 0.0003" ) |
GENERAL | ||
Control system | FANUC Oi - MD / HEIDENHAIN iTNC530 | |
Pneumatic pressure requirement ( min ) | kg/cm² ( PSI ) | 6 ( 85 ) |
Power requirement | kVA | 50 |
Machine weight | kg ( lb ) | 8,500 ( 18,750 ) |
Specifications are subject to change without notice.